不朽情缘官网下载_mg不朽情缘游戏在线试玩_mg不朽情缘游戏平台
Hi,欢迎访问上海仰光电子mg不朽情缘游戏在线试玩有限公司!
您当前的位置: 网站mg不朽情缘游戏在线试玩> 维修mg不朽情缘游戏在线试玩> mg不朽情缘游戏在线试玩文章
维修mg不朽情缘游戏在线试玩
mg不朽情缘游戏在线试玩文章

力士乐驱动器维修松江力士乐单相驱动器E250警告维修地址

发布者:hp    来源:上海仰光电子mg不朽情缘游戏在线试玩有限公司     发布时间:2023-10-9

力士乐驱动器维修松江力士乐单相驱动器E250警告维修地址

力士乐驱动器维修:E250 Heatsink Overtemperature Warning散热器过热警告

Description:说明:The temperature of the heatsink in the drive controller has reached the maximum allowable temperature. 驱动器mg不朽情缘游戏在线试玩器中散热器的温度已达到最高允许温度。

 

Within a time frame of 30 seconds, the drive follows the command value input. 30秒的时间mg不朽情缘游戏在线试玩内,驱动器将遵循命令值输入。

Consequently, there exists the possibility to shut down the motor with the control so that it remains true to the process.

因此,存在通过mg不朽情缘游戏在线试玩来关闭电机的可能性,从而使其与过程保持一致。

 

(For example close the operation, leave the collision area, etc.)

(例如,关闭操作、离开碰撞区域等)

After 30 seconds, the parameter "Best Possible Deceleration, P-0-

0119" set reaction appears during operation.30秒后,参数“最佳可能减速,P-0-0119“运行过程中出现凝结反应。

 

Cause:原因:

1. Deficiency of the drive's internal blower.

驱动器内部鼓风机不足。

2. Deficiency of the control cabinets climate control.

mg不朽情缘游戏在线试玩柜气候mg不朽情缘游戏在线试玩不足。

3. Incorrect control cabinet dimensioning regarding the head ventilation.

关于头部通风的mg不朽情缘游戏在线试玩柜尺寸不正确。

 

Remedy:补救措施:

For 1. If the blower fails exchange the drive controller.

如果鼓风机出现故障,请更换驱动mg不朽情缘游戏在线试玩器。

For 2. Install climitization feature to the cabinet.

在机柜上安装气候调节功能。

For 3. Check the dimensions of the control cabinet

检查mg不朽情缘游戏在线试玩柜的尺寸

 

松江力士乐单相驱动器维修地址:上海市嘉定区博园路858号上海仰光电子mg不朽情缘游戏在线试玩有限公司mg不朽情缘游戏在线试玩从事各mg不朽情缘游戏在线试玩伺服驱动器维修,伺服电机维修,触摸屏维修,变频器维修,伺服器维修,伺服mg不朽情缘游戏在线试玩器维修。



转载请注明出处:上海仰光电子mg不朽情缘游戏在线试玩mg不朽情缘游戏在线试玩伺服驱动器维修,伺服电机维修
本文链接:/fuwu/Services_Show21911.htm
伺服驱动器维修 伺服电机维修  触摸屏维修   变频器维修


mg不朽情缘游戏在线试玩方式:

电话:021-50157782
手机:13817011982 微信同号
邮箱:shygdzi@163.com
mg不朽情缘游戏在线试玩人:张工
网址:
【 我们确保修好测试好给mg不朽情缘游戏在线试玩!!!!】

上一篇:力士乐驱动器维修店博世力士乐伺服mg不朽情缘游戏在线试玩器E257代码维修mg不朽情缘游戏在线试玩
下一篇:没有了

最新相关内容推荐: